joshua daniels
iv tryed the torque filter adjustment but nothig seems to help when i run off the track in rf2 my wheel shakes relay relay bad to the point im scared it will break somthing can som1 plz help
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
jimcarrel
I run mine (depending on the car) .85 to .95 and it is good on the road. The FFB output offroad is a bit exaggerated I think. Anything below .95 makes it bearable to me.
Gary Corby
iv tryed the torque filter adjustment but nothig seems to help when i run off the track in rf2 my wheel shakes relay relay bad to the point im scared it will break somthing can som1 plz help
Joshua, I have a DFGT too. These are my settings:
Steering effects strength="7000"
Off-road multiplier="0.05"
Steering torque filter="16"
It's really important to set the off-road multiplier very low. The filter at 16 probably flattens the feel too much for most people, but I find it's necessary to smooth out the jerking wheel.
If that makes the car feel too loose (it probably will), then also set:
Steering torque sensitivity="2"
Anyway, those four variables are what you need to fiddle with.