mimeitakashi
Hello everyone, I am from Asia sim racer. My name is Mimei Takashi .
" I can speak Chinese and Japanese. Spoke little English,
Absolutely not understand German or French. In this post, i Written in English With the help of Google translation, so if translated content inappropriate language, please bear with me."
_________________________________________________
Credits
First of all,Credits！ please allow for people to make hard work opensim wheel to express my respect. thank you very very much.
The following (some original quote Martin Ascher tutorial) is that I know some of the people and contribute, as well as a lot of friends on the forum, I can not call out your names one by one, the same thank you.
Opensim Wheel Find all the dots here： http://www.rolli.dk/
The idea of this project was ordinated by Bernhard Berger at the end of 2013. The project’s documentation can be found at the german simracing community Virtual-Racing.You are the pioneers,And has a selfless spirit of sharing.
Another essential part, the USB HID Controller, is developed by the user "MMos". This project is also documented at Virtual-Racing. "All the Games"what I can say, the great work of unparalleled.
A lot of effort on the electronical side has been done by Dennis Reimer . With his develop-ments, the amount of work of building oneself an OpenSimwheel is reduced immensely.
Beano ,thank you very much attached to the course of the Forum,Since you started using argon and Mige big, now make DIY ioni tutorial, I have been concerned about your dynamic, you are on the YouTube tutorial video to help me a lot., thank you very much.
The OpenSimwheel-Tutorial by Martin Ascher，To be honest, if no tutorial， I can not do it alone osw accessories purchase and assembly, commissioning. To extend to you my most sincere thanks.
Marcushwang‘s web log,A lot of useful information on your blog to offer, including pictures and videos, to me the actual operation provides a great
Domestic simrace friends,goldfish, Wang Hongbo, white Kivu, Xiaobin, Yang Yang, etc., I can go on naming in this together thanks.
__________________________________________________ ____
My diy information, please see here
VR Forum posts: DD FFB Wheel Diy + 2DOF motion seat rig Diy by mimei
http://forum.virtualracing.org/showthread.php/97260-DD-FFB-Wheel-Diy-2DOF-motion-seat-rig-Diy-by-mimei-(with-My-DIy-experience)
mimei's final purchase list and cost（use Argon）
View attachment 17971
mimei's final purchase list Picture（use Argon）
View attachment 17972
start Buy accessories, wait arrival
View attachment 17970
Design
View attachment 17967
Enclosure Interface Design Notes
View attachment 17968
in progress
View attachment 17979
View attachment 17969
View attachment 17984
View attachment 17973
View attachment 17974
View attachment 17975
View attachment 17976
View attachment 17977
View attachment 17978
View attachment 17979
Continue to update later
__________________________________________________ ________
NOW,I got problem.hardware is almost complete.Argon drive ok too.
but,MMOs tools need initial to contect the argon drive and stm32 Disco.
This step is not successful.
The tutorial said:
View attachment 17980
but:
View attachment 17981
argon set:
View attachment 17982
stm32 Brush MMos 0.99 firmware successfully interface
View attachment 17983
my initial video
2015 9 15 restrat argon phasing was ok The Disco shows a blue LED flashing,then no matter how I turn
______________
I also went to VR forum for help. But not the cause.
Will the success diy friends, especially the use of argon and big mige same friends,
you is how to do this step?please,help me.please.
if you have any Ideas or opinions,please,connection me.
my email:
mimeitakashi@163.com
mimeitakashi@gmail.com
" I can speak Chinese and Japanese. Spoke little English,
Absolutely not understand German or French. In this post, i Written in English With the help of Google translation, so if translated content inappropriate language, please bear with me."
_________________________________________________
Credits
First of all,Credits！ please allow for people to make hard work opensim wheel to express my respect. thank you very very much.
The following (some original quote Martin Ascher tutorial) is that I know some of the people and contribute, as well as a lot of friends on the forum, I can not call out your names one by one, the same thank you.
Opensim Wheel Find all the dots here： http://www.rolli.dk/
The idea of this project was ordinated by Bernhard Berger at the end of 2013. The project’s documentation can be found at the german simracing community Virtual-Racing.You are the pioneers,And has a selfless spirit of sharing.
Another essential part, the USB HID Controller, is developed by the user "MMos". This project is also documented at Virtual-Racing. "All the Games"what I can say, the great work of unparalleled.
A lot of effort on the electronical side has been done by Dennis Reimer . With his develop-ments, the amount of work of building oneself an OpenSimwheel is reduced immensely.
Beano ,thank you very much attached to the course of the Forum,Since you started using argon and Mige big, now make DIY ioni tutorial, I have been concerned about your dynamic, you are on the YouTube tutorial video to help me a lot., thank you very much.
The OpenSimwheel-Tutorial by Martin Ascher，To be honest, if no tutorial， I can not do it alone osw accessories purchase and assembly, commissioning. To extend to you my most sincere thanks.
Marcushwang‘s web log,A lot of useful information on your blog to offer, including pictures and videos, to me the actual operation provides a great
Domestic simrace friends,goldfish, Wang Hongbo, white Kivu, Xiaobin, Yang Yang, etc., I can go on naming in this together thanks.
__________________________________________________ ____
My diy information, please see here
VR Forum posts: DD FFB Wheel Diy + 2DOF motion seat rig Diy by mimei
http://forum.virtualracing.org/showthread.php/97260-DD-FFB-Wheel-Diy-2DOF-motion-seat-rig-Diy-by-mimei-(with-My-DIy-experience)
mimei's final purchase list and cost（use Argon）
View attachment 17971
mimei's final purchase list Picture（use Argon）
View attachment 17972
start Buy accessories, wait arrival
View attachment 17970
Design
View attachment 17967
Enclosure Interface Design Notes
View attachment 17968
in progress
View attachment 17979
View attachment 17969
View attachment 17984
View attachment 17973
View attachment 17974
View attachment 17975
View attachment 17976
View attachment 17977
View attachment 17978
View attachment 17979
Continue to update later
__________________________________________________ ________
NOW,I got problem.hardware is almost complete.Argon drive ok too.
but,MMOs tools need initial to contect the argon drive and stm32 Disco.
This step is not successful.
The tutorial said:
View attachment 17980
but:
View attachment 17981
argon set:
View attachment 17982
stm32 Brush MMos 0.99 firmware successfully interface
View attachment 17983
my initial video
I also went to VR forum for help. But not the cause.
Will the success diy friends, especially the use of argon and big mige same friends,
you is how to do this step?please,help me.please.
if you have any Ideas or opinions,please,connection me.
my email:
mimeitakashi@163.com
mimeitakashi@gmail.com