Rally track AIW/waypoint question

Lengyel

Hello,

At the beginning sorry for my poor English ...

I would like to do a track for the rally and I have a question, how to deal with AIW / waypoints on a track that is not looped?

Below I have prepared a picture in which the exact explanation of what I mean.

View attachment 11751

I'll be very grateful for any help.

Regards
Lengyel
 
Do you want to use the track with AI too?

From that it depends, what makes sense to do.

And you will use ISI AIW-Editor, right?
 
When i remember right, the AIW-Editor was complaining when you didn't close the line of waypoints for the main-path.

So i would suggest the following.
When the Pit-entrance and -exit lines are driveable roads, you can take the whole lines black/purple/blue as a whole lap.
And for the pit-path you only take the purple and blue lines, starting after the finish.

And, because you don't need pitstop-places, when i am right, you can put them all together on the same place.
For example at the point where i made a red cross.
The garages you can put into the pitarea.

When you want to drive by yourself into the garage-area, the pitout-object should cross the pit-path only on the way out of pit and then it would also be better, to set the pit-locations into the garage-area too

AIW-oes_Neu.png
 
Many thanks guys for all the tips that have proven to be very helpful.

How do I find a free moment, I'll try graphically shows exactly how I solved my problem.

//EDIT:
Ok, in this picture showing exactly how I solved my problem with AIW
 
Last edited:
You must log in or register to reply here.

Back
Top