Cockpit info Display

[Angus94]

working on a Drag Racing mod, i dont need all the info that the LCD can display in the bottom right corner, can anyone tell me how to limit the info.

i really only want to display tyre temps and the timing of each lap (pass), the line below is directly from my plr file but it still shows everything, how do i edit this to limit what it shows, if in fact this is the correct file and line

LCD Display Modes="1, 3" // Add the modes to allow them: 1=status 2=aids 3=timing 4=engine/brake temps 8=race info 16=standings

thanks all.

 

[redapg]

I would say that the format you are using is wrong.
Normally you have to add the wanted values.

e.g. if you want to have displayed everything, you have to set:
LCD Display Modes="34" ( that is 1+2+3+4+8+16)
or just to have aids and engine you have to set:
LCD Display Modes="6" ( that is 2+4)

but i have not played around with it yet, try it out.

 

[Angus94]

ok, last ditch effort to get this sorted otherwise i'll forget about it and leave it as is. i have these showing at the moment, not knowing what they are called doesnt help, only guessing.

View attachment 12625View attachment 12626View attachment 12627View attachment 12628View attachment 12629

would really like to have just these 2.......

View attachment 12625View attachment 12626

any help really would be greatly appreciated

Angus94

 

[redapg]

You almost get it with:
LCD Display Modes="1"
But there is 1 problem with the Pit menu screen.
It will be shown even if you have "deactivated" all setting possibilities for it in the hdv-file.
If all is "deactivated" you get an empty screen nevertheless.

 

[Angus94]

thanks redapg

i'll give it a try and let you know

 

[Angus94]

yep that will have to do, i can live with that


thanks for your help, much appreciated